Product Catalogue
MID HINGE LIGHT POLES
The mid hinge light pole or see saw pole is designed to allow maintenance of luminaires in areas where access to the pole is restricted or limited.
The hinging operation using a see saw principle allows the light pole and luminaire to be lowered to the ground level without the need of any elevated works platform equipment such as a cherry picker.
There is also no need for any expensive hydraulic raising and lowering equipment other than one trained technician equipped with a rope.
APPLICATIONS
- Airports Lighting
- Camera poles
- Street lighting under power lines
- Sporting Ovals Lighting
- Lawn Bowling lighting
- Multi level car parks
- Construction Sites
- Mining Sites
- Railway stations
- Car park lighting
- Shopping centres
DESIGN OPTIONS & ACCESSORIES
- Operator training available
- The mid hinge pole range is standard base plate mounted, however in-ground mounted can be designed.
- All poles are hot dip galvanized to AS/NZS 4680:2006, and can be powder coated or painted in RAL or Dulux paint and colours to your requirements.
- The mid hinge pole range is available in standard heights of 5 metres to 30 metres, smaller or larger heights are also available upon request.
- All pole accessories such as luminaire crossarms, adaptors and headframes are available
- Extra access doors for the larger tapered octagonal poles.
- Security or tamper proof screws for access door covers.
- The product data sheet represents the standard range, but other heights, section sizes and deflection criteria can be custom designed to meet specific requirements.
- Slip joint assembly required for poles over 11metres in height.
CAMERA POLES
The Camera pole range with mounting heights of up to 15 metres, have been designed as a 16-sided tapered pole (hexadecagon) to reduce shaft deflection – to ensure least possible movement for highly accurate and clear vision required for all surveillance and security needs.
APPLICATIONS
- Freeway Traffic Monitoring
- Parking lot surveillance
- Facility Perimeter Security and lighting
- Prison Yard Observations
DESIGN OPTIONS & ACCESSORIES
- Ideally designed as a 16-sided pole, however round tapered can be manufactured
- The Camera pole range is standard base plate mounted, however in-ground mounted can be designed.
- All poles are hot dip galvanized to AS/NZS 4680:2006, and can be powder coated or painted in RAL or Dulux paint and colours to your requirements.
- The Camera pole range is available in a single or double outreach arrangement.
- Camera adaptors are available.
- Extra access doors for larger camera poles.
- Security or tamper proof screws for access door covers.
- Square section poles of mounting height up to 5 metres, can be used as camera poles
- The product data sheet represents the standard range, but other heights, section sizes and deflection criteria can be custom designed to meet specific requirements.
- Slip joint assembly required for poles over 11metres in height.
STREET LIGHTING POLES
The street lighting pole is used to securely illuminate private residential areas, commercial and industrial locations. The street lighting pole range is designed with a curved outreach arm, in either single a double arrangement. These poles have a maximum standard height of 12.5 metres and a maximum outreach of 4.5 metres. The street lighting pole is available in tapered round or tapered octagonal.
APPLICATIONS
- Residential subdivisions
- Commercial subdivisions
- Industrial subdivisions
- Major and Minor Roadway lighting
- Car park lighting
- Shopping centres
- Pathways
DESIGN OPTIONS & ACCESSORIES
- The street lighting pole range is standard base plate mounted, however in-ground mounted can be designed
- The street lighting pole is available in tapered round or tapered octagonal
- Can be custom made to fit under power lines (see saw hinged)
- All poles are hot dip galvanized to AS/NZS 4680:2006, and can be powder coated or painted in RAL or Dulux paint and colours to your requirements.
- The street lighting pole range is available in a single, double and triple outreach arm arrangement.
- Security or tamper proof screws for access door covers.
- The product data sheet represents the standard range, but other heights and section sizes can be custom designed to meet specific requirements.
TAPERED ROUND POLES
The tapered round pole range is very similar to the tapered octagonal range, but gives a modern and stylish appearance when applied to commercial and architectural environments.
Tapered round poles of up to 15 metres in standard height are also commonly used in small to medium sized floodlighting projects. They represent a typical form of street lighting and can add charm and sophistication to any precinct or neighbourhood.
APPLICATIONS
- Sports Lighting
- Parks and Reserves
- Commercial and Industrial developments
- Construction Sites
- Tennis Court Lighting
- Soccer Ground Light Poles
- Mining Sites
- Railways
- Airports
- Car park lighting
- Shopping centres
DESIGN OPTIONS & ACCESSORIES
- The tapered round pole range is standard base plate mounted, however in-ground mounted can be designed.
- All poles are hot dip galvanized to AS/NZS 4680:2006, and can be powder coated or painted in RAL or Dulux paint and colours to your requirements.
- The tapered round pole range is available in standard heights of 4.5 metres to 15 metres, larger heights are also available upon request.
- All pole accessories such as luminaire crossarms, adaptors, headframes, platforms, Lad Saf system, climbing rungs and lightning protection rods are available.
- Extra access doors for the larger tapered octagonal poles.
- Security or tamper proof screws for access door covers.
- The product data sheet represents the standard range, but other heights and section sizes can be custom designed to meet specific requirements.
- Slip joint assembly required for poles over 11metres in height.
TAPERED OCTAGONAL POLES
The tapered octagonal pole has a variety of uses from sporting ovals to industrial developments, from as low as 4.5 metres to as high as 35 metres. Due to the wide range of uses, the tapered octagonal pole is also known as the General Purpose pole.
The tapered octagonal pole is ideally suited to floodlighting projects that requires the luminaire control gear to be mounted inside the pole, due to the larger diameter at the base.
APPLICATIONS
- Sports Lighting
- Parks and Reserves
- Commercial and Industrial developments
- Construction Sites
- Mining Sites
- Railways
- Airports
- Car park lighting
- Shopping centres
DESIGN OPTIONS & ACCESSORIES
- The tapered octagonal pole range is standard base plate mounted, however in-ground mounted can be designed.
- All poles are hot dip galvanized to AS/NZS 4680:2006, and can be powder coated or painted in RAL or Dulux paint and colours to your requirements.
- The tapered octagonal pole range is available in standard heights of 4.5 metres to 35 metres, larger heights are also available upon request.
- All pole accessories such as luminaire crossarms, adaptors, headframes, platforms, Lad Saf system, climbing rungs and lightning protection rods are available.
- Extra access doors for the larger tapered octagonal poles.
- Security or tamper proof screws for access door covers.
- The product data sheet represents the standard range, but other heights and section sizes can be custom designed to meet specific requirements.
- Slip joint assembly required for poles over 11metres in height.
- Circular Pipe Light Poles -
CIRCULAR PIPE LIGHT POLES
The circular pipe light pole is generally intended for one post top light fixture and lends itself to a classic and sophisticated design style. Architectural luminaires tend to have added flair to complement a typically slim and elegant round mast silhouette.
The circular pipe pole ranges from as low as 2 metres to a standard height of 6.5 metres. Where required the circular pipe pole can be designed to a number of different heights.
APPLICATIONS
- Car parking lighting
- Shopping centres
- Universities
- Pathway lighting
- Park lands
- School yards
- Small sporting facilities such as Tennis and Netball courts
DESIGN OPTIONS & ACCESSORIES
- The circular pipe pole range is standard base plate mounted, however in-ground mounted can be designed.
- All poles are hot dip galvanized to AS/NZS 4680:2006, and can be powder coated or painted in RAL or Dulux paint and colours to your requirements.
- All pole accessories such as luminaire crossarms, adaptors and headframes are available.
- Extra access doors for larger poles.
- Security or tamper proof screws for access door covers.
- The product data sheet represents the standard range, but other heights and section sizes can be custom designed to meet specific requirements.
- Square Section Light Poles -
SQUARE SECTION POLES
The square section lighting pole is ideally used for floodlighting and gives the perfect balance when used with a square shoe box fitting.
The range extends from 2 metres to a maximum height of 12metres.
The square section pole can also be used as a small camera pole up to 5 metres in height.
APPLICATIONS
- Car parking lighting
- Shopping centres
- Universities
- Pathway lighting
- Park lands
- School yards
- Small sporting facilities such as Tennis and Netball courts
DESIGN OPTIONS & ACCESSORIES
- The square section pole range is standard base plate mounted, however in-ground mounted can be designed.
- All poles are hot dip galvanized to AS/NZS 4680:2006, and can be powder coated or painted in RAL or Dulux paint and colours to your requirements.
- All pole accessories such as luminaire crossarms, adaptors and headframes are available.
- Extra access doors for larger poles.
- Security or tamper proof screws for access door covers.
- The product data sheet represents the standard range, but other heights and section sizes can be custom designed to meet specific requirements.
DECORATIVE LIGHT POLES
Decorative poles have to be functional by night yet need to add distinction and ambience to the streetscape during the day.
Whether the aim is to create individuality to an urban area, styles are versatile and varied, incorporating federation, colonial heritage as well as contemporary designs to fit into any architectural surrounding.
APPLICATIONS
- Residential subdivisions
- Commercial subdivisions
- Shopping centres
- Universities
- Pathway lighting
- Park lands
DESIGN OPTIONS & ACCESSORIES
- The decorative pole range is standard base plate mounted, however in-ground mounted can be designed.
- All poles are hot dip galvanized to AS/NZS 4680:2006, and can be powder coated or painted in RAL or Dulux paint and colours to your requirements.
- The decorative pole range is available in a single or double outreach arrangement.
- Security or tamper proof screws for access door covers.
- The product data sheet represents the standard range, but other heights and section sizes can be custom designed to meet specific requirements.
TRAFFIC SIGNAL POLES
Traffic signal poles are used by road authorities as an important part of their traffic management and town planning to keep automotive and pedestrian traffic safely flowing.
Traffic signal poles are exclusively designed to the Australian Standards as well as to the relevant state road authorities specifications.
APPLICATIONS
To control the flow of traffic in a safe and organised manner:
- Roadway intersection
- Pedestrian crossing
- Railway crossing
- Freeway on ramps
- Exiting shopping centres
DESIGN OPTIONS & ACCESSORIES
- The traffic signal pole range is standard base plate mounted, however in-ground mounted can be designed.
- All poles are hot dip galvanized to AS/NZS 4680:2006, and can be powder coated or painted in RAL or Dulux paint and colours to your requirements.
- The traffic signal pole is available in a wide range of sizes to accommodate both the automotive and pedestrian traffic
- The traffic signal pole range is available in a single and double outreach arm arrangement
- Decorative styles to suit almost any streetscape design are also available
- Security or tamper proof screws for access door covers.
- Terminal strip supplied only with JUMA, MA and JUP.
- Slip joint assembly required for poles over 11metres in height.
|
